1. The tape should be stored in a warehouse, avoiding direct sunlight and rain; contact with acids, alkalis, oils, and organic solvents is prohibited. Keep it clean and dry, at least 1 meter away from any contaminating device, and at an ambient temperature between -15℃ and 40℃.
2. The diameter of the conveyor rollers and the minimum pulley diameter of the conveyor belt should comply with relevant regulations.
3. Do not connect (group) polyimide tapes of different types, specifications, strengths, and ply counts together.
4. The type and specifications of antistatic tape should be selected rationally according to application needs and specific conditions.
5. Use a crane when loading and unloading conveyor belts, and use slings with crossbeams to lift them smoothly to avoid damaging the belt edges. Do not handle them roughly, causing loosening or slippage.
6. The conveyor belt joints should be hot-vulcanized to improve reliability and maintain high effective strength.
7. Gold finger tape should be stored in rolls, not folded. If stored for an extended period, it should be turned over once per quarter.
8. Cleanliness is a fundamental condition for the proper operation of gold finger tape. Foreign substances can affect tape eccentricity, tension differences, and even breakage.
9. When the conveyor is equipped with baffles and cleaning devices, wear on the polyimide tape should be avoided.
10. Do not allow the polyimide tape to snake or creep. Keep the drag rollers and vertical rollers sensitive, and maintain appropriate tension.
11. If premature damage to the polyimide tape is observed during use, the cause should be identified and repaired promptly to prevent adverse consequences.
